SF6 Gas Monitoring in Circuit Breakers

20 May.,2024


SF6 Gas Monitoring in Circuit Breakers

SF6 (sulfur hexafluoride) gas is commonly used as an insulating medium in high-voltage circuit breakers and other electrical equipment. It offers excellent electrical insulation properties and high thermal stability, making it suitable for use in these applications.

Are you interested in learning more about 219 854 2? Contact us today to secure an expert consultation!

Monitoring SF6 gas on a circuit breaker is important for several reasons:

What is SF6 and why is it important?

What is SF6 and why is it important?

Share This:



February 23, 2023

When people talk about greenhouse gas (GHG) emissions, the focus is usually on carbon dioxide or methane. 

These two gasses make up about 90% of the GHGs that cause climate change. But there are a number of others that climate scientists monitor. Among them is sulfur hexafluoride, or SF6, a colorless, odorless gas used as an insulator in power substations. Though its prevalence in the atmosphere is small, it has the potential to make an outsized impact. That’s because it is the most potent GHG, with 23,500 times the global warming potential of carbon dioxide.

Researchers in the power and energy sector where it is used have devoted significant effort to finding replacements. 

If you want to learn more, please visit our website c4f8 gas suppliers.

What does SF6 do? 

Sulfur hexafluoride is a very powerful insulator that has been used for decades to prevent short circuits and electrical arcing in electrical substation equipment, like high voltage switchgear and transformers.  It’s stable, nontoxic, and has a low level of flammability, all properties that have made it applicable to a wide range of operating environments and voltage levels in the power industry. 

“SF6 has been used globally as a very efficient insulation gas,” said IEEE Senior Member Guilherme Susteras, “which means that utilities globally could build electrical power stations and substations in a more compact fashion. This is especially important in urban settings, where physical space can be a serious constraint for network expansion.”

What’s the impact of SF6? 

Every pound of SF6  released into the atmosphere is equivalent to the carbon impact of two  cars on the road per year, or 1,100 gallons of gasoline, or burning 11,000 pounds of coal, according to an online calculator developed by the U.S. Environmental Protection Agency. And because it’s so stable – meaning it doesn’t mix with other compounds – it lasts for a long time in the atmosphere, around 3,200 years. Methane, for comparison, remains in the environment for about 12 years. 

Estimates vary pretty significantly about how much SF6 is emitted every year. But measurements of its presence in the atmosphere show it is growing – from four parts per trillion in 2000 to about 11 parts per trillion in 2021.

How does it enter the atmosphere? 

The power and electrical industry accounts for 70%-80% of the total SF6 gas emissions, according to IEEE Senior Member Ling Wang. Typically, the gas is usually used in sealed units, which can leak during production, maintenance and decommissioning.

What’s being done about it?

SF6 was first identified as a GHG of concern as part of the Kyoto Protocols in 1997 – the international agreement that represented the first binding GHG reduction targets for industrialized countries. That set off a broad effort to reduce its use. Power equipment, for example, was redesigned to use significantly less over the years. And power companies have gotten pretty good at detecting leaks.

One strategy is to substitute SF6 with something else. Replacement gasses need to operate in a wide range of temperature conditions, while remaining stable and non-toxic. Replacements should be relatively inexpensive to produce. And while stability is important, researchers don’t want something that’s so stable that it will remain in the environment for 3,200 years.

“There are currently many research development initiatives in pursuit of a cost-effective alternative to SF6, and there are some alternatives for very specific applications, but there currently isn’t any direct alternative for a wider application,” said Susteras. 

Some of these replacements are already in use, Ling said. 

“From the perspective of substitution, SF6 can be replaced by low global warming potential insulation media, such as dry air and vacuum,” Ling said, adding that there are also options for ultra-high voltage and high-performance needs.

Learn more: IEEE Power and Energy Society members are leading the way to safely replace SF6. Check out their efforts to provide new guidelines for replacement gasses.

For more calibration gas supplierinformation, please contact us. We will provide professional answers.